Operation Manual

16
Checkthewholeunitwithsoapwateroragas-leakdetectorafterttingthepipe.
Avoidtensiononthegasunitwhenttingthegaspipe.
2.5 Maintenance
Havethereplacecheckedandcleanedbyanauthorisedprofessionaleveryyeartoguaranteeproper
and safe operation of the stove.
Theburnerunitconsistsofapilotameandacombustionchamber.
The ceramic glass pane can be cleaned by a cleaning agent specially intended for ceramic cookers.
If a log is broken, it must be replaced.
If there is a crack in the glass window or if the pane is broken, it must be replaced before operating the
gas hearth.
When replacing the log set, be sure to place them in the correct position (see ´placing the log set´).
2.6 TTB safety device
ThisgashearthisprovidedwithaTTBdraughtbreaker,winddiverterandthermalreuxvalve.
2.7 Log set
Firstly,lltheburnerplatewiththeenclosedgrains(seeillustration5a).
Then place the enclosed chips at the front side of the burner between the logs.
Caution! Never use
more grains than the
supplied quantity.
Now put the logs into
place according to
illustrations 5a and
5b.
When putting the
logs into place, make
sure that none of the
logs covers the pilot
ame.
Be sure to place the
logs exactly as the
example, so as to
cover the ames as
less as possible and
topreventtheames
from interruption
and to avoid soot
deposits.
Make sure that the
glasswindowisrmly
closed before lighting
the hearth.
Illustration 5a
Illustration 5b