Operation Manual
17
GB
Your Square Basic Basic stove at a single glance
The Square Basic Basic 60
The Square Basic Basic is a combination of comfort and ecient heat emission. The large glass panes allow
emission of the heat from the stove directly to the environment to make your room instantly comfortable. The
built-in ue gas deector ensures circulation of ue gases in the interior parts. Combined with the extra after-
burning, it means that the ue gases have better combustion and reduce the burden on the environment. You
can regulate the intake of combustion air with the integrated air slide valve and adjust the intensity of the re
and the output of your stove.
Installation
It is common practice for the dealer where you purchased your Square Basic Basic stove to also take care of
installing it. If this is not the case, please ensure that the installation is done by a certied installer. A certied
installer can also give you the right advice about the ue pipe to which the stove must be connected. Connecting
wood-burning stoves by unqualied persons is prohibited, in which case we cannot give any guarantee about
proper functioning of your Square Basic Basic stove. Please bear the re safety in mind when installing the stove.
See also page 21.
The wood-burning stove is suitable as an extra heat source and does not replace your principal heating
device.
Lighting your stove early in autumn or late in winter
When the external and internal temperatures do not dier much, a proper chimney draught is a real
challenge. You can help chimney draught get started by burning some wood while keeping all air
inlets maximally open. An abundant air supply speeds up quick heating which in turn increases the
draught in the chimney. Lighting up the stove with only a little wood prevents smoke from streaming
into the room.
!
!