Operating Instructions and Installation Instructions

safe to keep them at a distance of at least 1.5m.

Opening the stove

Remove the 4 nuts with wrench 10 and remove the glass pane (caution: the pane is made of cast iron and is

rather heavy).

Do not touch the glass with your ngers as nger marks will burn into the glass.

Before relighting the stove, make sure that the door is closed correctly again

Mounting the collar shaft

Depending on the length and the form of the

concentric duct system Ø 100 - Ø 150 mm and

the outlet construction, you must mount a

collar shaft with a diameter of Ø 50mm or Ø

70mm according to the tables on page 26. The

standard passage for ue gases is Ø 100 mm

on the upper side of the combustion chamber.

Ensure that the collar shaft is

properly tted. Fitting the collar shaft

incorrectly may cause defects to the

appliance.