User Manual

WAMPLER TERRAFORM Page
11
THE GEEKY STUFF
You’ll be delighted to know that this will be the most sparse section
in the manual, as there isn’t a lot to talk about. Here it is in full.
PROGRAM CHANGE: To change the preset, send a MIDI program
change on any channel with the desired program as the program
byte. Example: PC 8 -> loads preset stored in patch 8
TAP TEMPO: To trigger a tap tempo press, send a MIDI control
change on any channel with 81 and 0 as the controller and value
bytes. Example: CC 81 0 -> triggers tap tempo
TRS SPECIFICATION
The TERRAFORM communicates with TRS type A cables (Tip = 5,
Ring = 4, Sleeve = 2.
MIDI BYPASS: To assign “bypass” to a MIDI program change, press
and hold the preset switch (as if you were saving a preset). Press
the preset switch until all four preset LEDs blink simultaneously.
Send a MIDI program change to the TERRAFORM. Press and hold
the preset switch to assign “bypass” to that MIDI program change
number. This does not affect any of the saved presets; it only links
the program change and bypassing the TERRAFORM. Sending that
program change number will now bypass the Terraform.
MIDI CHANNEL
The TERRAFORM can be configured to respond to any of the 16
midi channels 1-16, or all of them (omni mode). The default is omni
mode, so you will get an instant response from midi inputs. To
change this, power off TERRAFORM, hold preset switch, and then
power on and release the preset switch. the preset LEDs will display
the current channel number in binary+1 (channel 1 = 0 LEDs,
channel 2 is the right most LED, channel 3 is the third LED, etc).
Omni mode is when all 4 LED sweep through. Press the preset
switch to cycle up the channels, and then hold for 5 seconds when
the desired channel is selected. This will save the required channel
and restart the TERRAFORM.
0000 = channel 1 0001 = channel 2 0010 = channel 3
0011 = channel 4 0100 = channel 5 0101 = channel 6
0110 = channel 7 0111 = channel 8 1000 = channel 9
1001 = channel 10 1010 = channel 11 1011 = channel 12
1100 = channel 13 1101 = channel 14 1110 = channel 15
1111 = channel 16
(all four sweeping through) = omni (responds to any channel)