BL19103 ASSEMBLY INSTRUCTIONS STURBRIDGE VINYL YARD & POOL FENCE WITH POST AND NO-DIG STEEL PIPE ANCHOR KIT ASSEMBLY INSTRUCTIONS BL19103 Note: Finishing post (BL19042) is not included but is available for purchase. (4’H X 6’W) 60 MIN Approximate assembly time Want to see a video on how to assemble this product? Scan the QR code CONFORMS TO BOCA POOL CODE WWW.WAMBAMFENCE.COM WWW.WAMBAMFENCE.COM 1VER.
BL19103 ASSEMBLY INSTRUCTIONS GENERAL INFORMATION IMPORTANT k Check the inside of the larger pieces in your box for other materials packed inside. k When assembling components, place on a non-abrasive surface (i.e. shipping box) to avoid scratching. k We recommend an area approximately 5’x 8’ for unobstructed assembling. k You should not need to use excessive force when assembling components.
BL19103 ASSEMBLY INSTRUCTIONS TIPS 1. Run a string line to help establish the post location(s). 2. To space the pipe anchors more easily, use a piece of wood measuring 70⅜” in length from the inside gear to the next pipe anchor. 3. After you have installed the first two vinyl posts and have checked your spacing, temporarily remove the posts to create an unobstructed string line. 4. When cutting PVC, use a saw with a fine-toothed blade. Donut Wood Spacer Inside Gear 5.
BL19103 ASSEMBLY INSTRUCTIONS AVOID THESE PITFALLS! HAVE YOU CONTACTED YOUR LOCAL UTILITIES? 1 You must call your local utilities before you start installing your fence to avoid puncturing any unseen underground utilities, especially electrical or gas lines. Fortunately, this is made easy for you. k Simply call 811 in the US or visit www.call811.com. k In Canada, visit www.transcanada.com/contactus.html for a list of phone numbers by province.
BL19103 ASSEMBLY INSTRUCTIONS DETAILED PRODUCT DIMENSIONS AND SPECIFICATIONS 1.5 in 3.0 in .875 in 3.5 in 1.5 in .090 in. Wall Thickness .875 in .5 in 3.67 in 1.5 in 3 in 3.5 in 50 in 41 in 26 in 3.5 in 1.0 in 2 in Ground 68 in 72 in 1.5 in 32.5 in 3.5 in .090 in. Wall Thickness WWW.WAMBAMFENCE.
BL19103 ASSEMBLY INSTRUCTIONS STEP 1: LAY OUT MATERIALS A B F Bracket (4) G Post Cap (1) Post (1) 4” x 4” x 53” Donut and gear C Pipe Anchor (1) 1⅝” Dia. x 58½” Horizontal Rail (2) 1½” x 3½” x 67¾” D Thin Picket (6) ⅞” x 1½” x 45” 6 H E Wide Picket (5) ⅞” x 3” x 45” 1” Self-Drilling Stainless Steel Screw (24) WWW.WAMBAMFENCE.
BL19103 ASSEMBLY INSTRUCTIONS STEP 2: INSTALL PIPE ANCHORS AND POSTS STEP 2.1 After establishing your fence lines with string and stakes, drive your first Pipe Anchor (G) into the ground. The bottom of the donut should sit just above the ground when finished. Note: Try and drive the pipe anchor as level as possible. Check level about every 12”.
BL19103 ASSEMBLY INSTRUCTIONS STEP 2.5 STEP 2.4 Adjust bottom and top donuts to compensate for a crooked pipe anchor. Slide Posts (B) down over donuts. B Note: Ground can be dug out about 3” to 4” to allow post bottoms to sit below the ground if necessary. STEP 3: INSTALL BRACKETS AND BOTTOM RAILS STEP 3.2 STEP 3.1 Place second bracket over the opposite end of the Horizontal Rail (C), and slide the rail down into the bracket on the opposing side.
BL19103 ASSEMBLY INSTRUCTIONS STEP 3.3 Use a level on the top of the bottom rail to determine height of opposing bracket, and mark for installation. STEP 3.5 Slide horizontal rail down into the brackets. Secure with (4) 1” stainless steel screws. STEP 3.4 Temporarily remove bottom rail and install bracket using (4) 1” self-drilling stainless steel screws. STEP 3.6 Install top brackets 41½” above the top of the bottom brackets using (8) 1” self-drilling stainless steel screws. 41½” WWW.WAMBAMFENCE.
BL19103 ASSEMBLY INSTRUCTIONS STEP 4: INSTALL PICKETS STEP 4.1 E D Insert Thin Pickets (D) and Wide Pickets (E), alternating thin and wide as illustrated. STEP 5: INSTALL HORIZONTAL RAIL AND POST CAPS STEP 5.1 2 1 Step 1: Starting at one end, insert the first picket into the horizontal rail. Walk the horizontal rail down over the pickets one-by-one after aligning each picket to the picket holes in the horizontal rail. Step 2: Secure with (4) 1” stainless steel screws. 10 WWW.WAMBAMFENCE.
BL19103 ASSEMBLY INSTRUCTIONS STEP 5.2 Trim down tops of the posts if necessary, and install Post Caps (A). Use PVC glue (not included) to secure permanently. A WWW.WAMBAMFENCE.
BL19103 ASSEMBLY INSTRUCTIONS 6935 Reames Rd. Ste. K. Charlotte, NC 28216 hmmm@wambamfence.com 704-892-5222 877-778-5733 WWW.WAMBAMFENCE.COM 12 WWW.WAMBAMFENCE.
