Installation Guide

ManualsBrandsWamBam Fence ManualsFencingNantucket Vinyl Picket Gate w/Stainless Steel Hardware (48" H x 48" W)

REALLY

Important stuff to know about

installing your WamBam gate.

WamBam Nantucket Vinyl Picket

Gate w/Stainless Steel Hardware

(48” H x 48” W)

1-877-778-5733

w ww.wambamfence.com

V-2.0

This gate is designed to be integrated with our

WamBam Nantucket Vinyl Picket Fence - 4' High.

(This gate can also be used in any opening that is 50” wide or less

by trimming down both the top and bottom rail).

(Adjustable Width)

Summary of content (8 pages)

PAGE 1
WamBam Nantucket Vinyl Picket Gate w/Stainless Steel Hardware (48” H x 48” W) (Adjustable Width) REALLY Important stuff to know about installing your WamBam gate. This gate is designed to be integrated with our WamBam Nantucket Vinyl Picket Fence - 4' High. (This gate can also be used in any opening that is 50” wide or less by trimming down both the top and bottom rail). V-2.0 1-877-778-5733 www.wambamfence.
PAGE 2
WamBam Nantucket Vinyl Picket Gate w/Stainless Steel Hardware 1 - Read Over Fence Instructions First Your gate and fence will work better together as an integrated solution if you first take the time to read and understand your fence instructions. 2 - Pre-Assemble the Gate Frame (without pickets) Please do not screw your gate frame together until you have first temporarily assembled the gate. In other words, do a dry run first.
PAGE 3
WamBam Nantucket Vinyl Picket Gate w/Stainless Steel Hardware PRODUCT OVERVIEW Gate Assembly Gate Installation 3.78 in 48 in 1.5 in 3.5 in A 4 in 47.5 in 24.875 in C 49.375 in D 48 in 26 in 7.75 in 3.5 in B 48 in A 1.5in. 3.5in. 2 in D C B 1.5in. 3.5in. 3.5in. 1.5in. 50 in 54 in 1.5in. 3.5in. Ground 32.5 in Posts & Pipe Anchors Sold Separately .090in. wall thickness BOX CONTENTS Each Gate Box Includes: • • • • • • • • • • .135in.
PAGE 4
WamBam Nantucket Vinyl Picket Gate w/Stainless Steel Hardware DETAILED ASSEMBY INSTRUCTIONS STEP 1 Assemble the Gate Frame Bottom & Sides Did you do a dry run of assembly first? Please read page 1 of instructions. A Note that the bottom rail is ribbed internally. Insert fully to this point. Completely assembled gate shown A - Insert the bottom rail ALL THE WAY until it BOTTOMS OUT inside gate bracket C B Fasten gate brackets to internal members though inside of frame using screws.
PAGE 5
WamBam Nantucket Vinyl Picket Gate w/Stainless Steel Hardware C D C - Slide T-brackets with toprail attached down over the vertical gate stiles D - Completely assembled gate frame shown STEP 3 Screw Gate Frame/Brackets A A - Screw into brackets as necessary For more information, contact us at 1 877-778-5733.
PAGE 6
WamBam Nantucket Vinyl Picket Gate w/Stainless Steel Hardware STEP 4 Insert Pickets Into Gate Frame & Attach Caps A WARNING: Pickets once inserted into bottom rail cannot be removed. A - Insert pickets through top rail down into bottom rail B C B - Install bracket caps. Use pvc glue (purchase separately) if you would like to permanently secure caps to T-brackets C - Completed gate with frame shown.
PAGE 7
WamBam Nantucket Vinyl Picket Gate w/Stainless Steel Hardware STEP 6 Position, Adjust & Algn Gate/Secure Hinges to Posts B A - Use temporary spacers OR blocks to rest the gate on during alignment and installation B - Fasten hinges to post with screws STEP 7 Level Gate & Adjust Hinges A B A - Fasten gate hinges accordingly LEVEL B - Check for level, fit and function to latching post For more information, contact us at 1 877-778-5733.
PAGE 8
WamBam Nantucket Vinyl Picket Gate w/Stainless Steel Hardware C Adjust the spring tension . in gates as necessary. Use steel insert pin. C - Hinges can be adjusted moderately to bring gate into level alignment with post D Latch is designed for left and right hand applications Temporarily remove. the spring, bolt and reverse paddle portion as necessary. A STEP 8 Align & Install Latch B A - Align and fasten the gate latch catch to fit and function with the gate finger.