Instructions / Assembly

WWW.WAMBAMFENCE.COM
8
ASSEMBLY INSTRUCTIONS
BL19101
STEP 3: INSTALL BRACKETS AND BOTTOM RAILS
Note: The ground can be dug out about
3” to 4” to allow post booms to sit below
the ground if necessary.

to compensate for a crooked pipe
anchor.
Install (1) Bracket (G) on the post approximately
-
less Steel Screws (H).
Place the second bracket over the opposite
(E) and slide the rail
down into the bracket on the opposing side.
Note: There could be a slight conict between
the head of the exposed screw and the end of the
rail in a ght ng applicaon. The end of the rail
can be notched to accommodate.
Slide the Posts (B) down over the
donuts.
STEP 2.4
STEP 3.1
STEP 3.2
STEP 2.5
B
G
E
H
2”