Manual

21
FIELD STRIPPING DISASSEMBLY CONT’D.
WARNING: DO NOT ALTER, MODIFY OR REPLACE ANY OF THE PARTS
OF YOUR FIREARM UNLESS THIS WORK IS PERFORMED BY A
QUALIFIED GUNSMITH USING GENUINE WALTHER PARTS. IF YOU DO
OTHERWISE, IMPROPER FUNCTIONING MAY OCCUR AND SERIOUS
INJURY MAY RESULT.
WARNING: NEVER DISASSEMBLE YOUR HANDGUN BEYOND THE
FIELD STRIPPING PROCESS OUTLINED IN THIS MANUAL. NEVER
MANIPULATE ANY INTERNAL COMPONENTS BEYOND WHAT YOU ARE
SPECIFICALLY INSTRUCTED TO DO IN THIS MANUAL SINCE THIS MAY
AFFECT THE RELIABILITY, FUNCTIONING AND SAFETY OF YOUR
HANDGUN.
FIELD STRIPPING ASSEMBLY
WARNING: ALWAYS FOLLOW THE FIELD STRIPPING INSTRUCTIONS
EXACTLY. NEVER DO ANYTHING BEYOND WHAT YOU ARE
SPECIFICALLY INSTRUCTED TO DO IN THIS MANUAL. NEVER ALTER
OR MODIFY THE PARTS IN YOUR PISTOL.
WARNING: WEAR SAFETY GLASSES EVERY TIME YOU ASSEMBLE OR
DISASSEMBLE YOUR FIREARM.
• With the bottom of the slide turned
upwards, replace the barrel in the
slide so the muzzle is flush with the
front end of the slide and the barrel
lug is turned up away from the
ejection port. (Figure 21.1)
FIGURE 21.1