Operating Instructions

39
LP500 MATCH AIR PISTOL
DE
EN
ES
FR
8 MAINTENANCE
• The movable parts have been treated with long-lasting lubrication and must not be serviced by
the shooter.
• The pistol is made of modern materials like aluminum and CFRP. The exterior should not be oiled
or greased.
• As an exception, after about the tenth removal and reattachment of the compressed air cylinder,
lightly lubricate the thread on the connection pieces of the pressure reducer with an acid-free
silicon grease.
• The pistol can be blown out with compressed air to free it from dust and dirt.
• Clean the inside of the barrel using
– commercial felt pellets for shooting through,
– cleaning patches for pulling through with a cleaning line.
• Always clean inside the barrel in the direction of the pellet’s path, in other words, from the
loading tray to the barrel.
• Never insert a cleaning rod into the barrel through the compensator.
9 STORAGE AND TRANSPORT
9.1 Storage
Observe and comply with government regulations in your country for handling weapons and ammu-
nition. Store the unloaded pistol and accessories in the included plastic case in a dry room at room
temperature.
9.2 Transport
Always transport the unloaded pistol in the included plastic case.
9.2.1 Aircraft transport
The compressed air cylinder must be emptied completely before transporting on an aircraft.
!
WARNING
The risk of unintended firing is possible when cleaning and maintaining the
pistol.
Ensure that the pistol is unloaded and uncocked when cleaning and main-
taining.
Remove the compressed air cylinder.