Operating Instructions

38
LP500 MATCH AIR PISTOL
7.2 Filling the compressed air cylinder
The removable compressed air cylinder is approved for a pressure of max. 200 bar. The pressure in
the cylinder can be read on the built-in pressure gauge.
The compressed air cylinder can be removed, replaced or filled at any time with an intact and main-
tained device for filling compressed air cylinders.
• Only attach and tighten the included adapter to the device for filling compressed air cylinders.
• Unscrew the compressed air cylinder from the air pistol and connect to the adapter.
• Slowly open the valve of the device for filling compressed air cylinders and close it.
• Unscrew the compressed air cylinder from the adapter and screw the compressed air cylinder
onto the pistol by hand until tight.
7.3 Emptying the compressed air cylinder
Empty the compressed air cylinder with the included filling adapter.
• Unscrew the compressed air cylinder from the pistol.
• Slowly screw the included filling adapter onto the compressed air cylinder.
• The compressed air will audibly drain from the cylinder until it is completely empty.
!
WARNING
The compressed air cylinder is designed for an operating pressure of 200 bar.
Filling the compressed air cylinder beyond 200 bar may destroy the cylinder and
cause serious injury.
Only fill to 200 bar using a device for filling compressed air cylinders
!
CAUTION
High noise levels can cause hearing damage.
The noise level of the compressed air flowing from compressed air cylinders can
be extremely high.
Always wear hearing protection when emptying compressed air cylinders.
Alert other persons to the danger and compel them to wear hearing protection.