Operating Instructions

33
LP500 MATCH AIR PISTOL
DE
EN
ES
FR
6.5.8 Changing the trigger system
Before changing the trigger system, make sure that the pistol is unloaded and uncocked (see
Section 5.2).
• Dismantle the grip (see Section 6.1.1).
• Undo screws (1) with a 2 mm Allen key
• Remove the trigger system from the housing.
• To install the new trigger system slightly tighten both screws.
• Tighten the right-hand screw and then the left-hand one.
1
NOTE
Check the trigger pull weight after replacing or reinstalling the trigger system. It may
have changed slightly.
Figure 19