Operating Instructions

29
LP500 MATCH AIR PISTOL
DE
EN
ES
FR
6.5.1 Dry-firing trigger
The trigger is cocked in the loading process. By pressing slide (1) to the right, the travel of the striker
is limited when the trigger is released, so that the firing valve is not operated. This permits genuine
dry-firing training.
If a training shot is to be fired during competition with the pistol loaded, slide (1) can be moved from
the left “firing position” to the right “training position”.
6.5.2 Adjusting the trigger blade
The trigger blade setting can be horizontally and vertically adjusted to each unique trigger finger.
There are three positions available on the trigger carrier (2) for adjusting the height.
6.5.2.1 Changing the height of the trigger blade on the trigger carrier
• Loosen the screw (2) using the 2 mm Allen key.
• Move the trigger blade (3) and sleeves (4) to the desired position.
• Retighten the screw (2).
!
CAUTION
Move the dry-firing slide only when the breech is all the way open.
NOTE
When the trigger height is changed, the trigger pull weight changes and must be
adjusted (Section 6.5.4).