Manualshelf

Operating Instructions

ManualsBrandsWalther ManualsAir PistolsLP500
61626364656667686970
26
LP500 MATCH AIR PISTOL
6.4.3.2 Elevation adjustment
Use the screw (2) to alter the elevation of the rear sight.
• Correction for high shot: Turn the adjusting screw clockwise using the 2 mm Allen key.
• Correction for low shot: Turn the adjusting screw counterclockwise using the 2 mm Allen key.
Test the setting by shooting at a test target.
6.4.3.3 Windage adjustment
Use the screw (3) to alter the horizontal position of the rear sight.
• Correction for shots to the right: Turn the adjusting screw clockwise using the 2 mm Allen key.
• Correction for shots to the left: Turn the adjusting screw counterclockwise using the 2 mm Allen
key.
Test the setting by shooting at a test target.
NOTE
At maximum sight length, every notch of the knurled screw corresponds to 0.8 mm
on the target when adjusting the elevation and windage. Approximately 10 notches
represents a shift around the ring on the target.
NOTE
At maximum sight length, every notch of the knurled screw corresponds to 0.8 mm
on the target when adjusting the elevation and windage. Approximately 10 notches
represents a shift around the ring on the target.