Operating Instructions

11
LP500 MATCH AIR PISTOL
DE
EN
ES
FR
4.2 Components
4.2.1 Sights
The sight is an open design with rear sight and front sight. The notch of the rear sight is rectangular
with an individually adjusted width and depth (see Sections 6.3.4.1/6.3.4.2). The integral front sight
has three widths (see Section 6.3.2). The front and rear sights can be swiveled about the barrel axis
(see Section 6.3.1).
4.2.2 Barrel
Different barrel versions are available, with and without gas ports. All are protected with a replace-
able barrel jacket (see Section 6.5). A variety of types are available to suite individual preferences.
4.2.3 Trigger
The trigger, which is available in a mechanical and an electronic version, is optimally calibrated ex
works according to ISSF regulations. Both versions offer a number of versatile settings (see Section
6.4). Blank shots can be fired for practice purposes (dry training) (see Section 6.4.7).
4.2.4 Grip
The 3-D walnut grip is attached to the frame from below and is held by a screw on the side. The
Regular version is available in sizes S-L. The Slim version has a slightly smaller volume and is
available in sizes XXS-XL (same as the grips of the LP400). All grips can be individually matched to
the shooter by adjusting the hand rest (see Section 6.1).
The ALL-IN-ONE version is an exception. It is made of robust fiber-reinforced plastic and can be in-
dividually set to sizes S-L by adjusting the hand rest (see Sections 6.2.1/6.2.2). It can also be easily
repositioned for left-handed shooters (see Section 6.2.3).
A 5D grip is also available. In addition to having the adjustment options of the walnut grip, it has a
continuously adjustable grip volume.
4.2.5 Compressed air cylinder
The compressed air cylinder, made of a carbon-aluminum composite, is approved for compressed
air up to 200 bar and is screwed onto the pressure reducer. It can be unscrewed, filled or changed
at any time (see Section 7). The pressure level can be checked with the built-in pressure gauge.