Instruction Manual
LP400 – Operating Instructions
-28-
Caution: Before performing any adjustment, assembly, care or cleaning work,
always check the gun to be sure it is unloaded and the barrel is free of pellets
and foreign matter. Always wear eye and ear protection.
6 Trigger
The trigger is set at the factory to the optimal setting as per ISSF rules. However,
it has a wide range of adjustment possibilities.
Trigger finger piece
This can be adapted individually to the trigger finger. After the screw (h) has
been loosened, the finger piece can be moved forward and back and swiveled
approx. 15° right and left.
After the screw (f) has been loosened, the finger piece can be turned around its
vertical axis. You can also change the height by rearranging the spacer sleeves.
Trigger stop (second stage over-travel):
Turn the setscrew (b) clockwise if a mechanical trigger stop is required. Caution:
If you set the second stage over-travel too short, there may be malfunctions. If
the shot is not released smoothly, open the trigger stop screw (b) by a small
amount.