Instruction manual

LG400 – Operating Instructions
-50-
14 Fore-end elevation for shooting in the standing position
LG400 Anatomic & LG400 Alutec Expert
The fore-end elevation for
shooting in the standing
position can be adjusted in
the longitudinal direction, in
its height and in its
inclination. It can also be
swiveled about the barrel
axis.
To reduce or increase the
fore-end elevation in the
longitudinal direction, undo the countersunk screws (a). This unclamps the holding
rail. Adjust the fore-end height and the inclination angle using the clamping screws
(c). Slightly undo all screws (c), set the required height and inclination, then
retighten the screws (c). To swivel the fore-end transversely to the direction of
shooting, undo the screws (b). After positioning, retighten the screws (b).
• Mutually independent settings of height, inclination and lateral swivel.
• Ergonomically optimum width of 50 mm
• Rough-textured coating for a sure grip
LG400 Alutec Competition & LG400 Alutec Basic