User Manual

LG400-E
\\Client\S$\tb\BED-WERB\LG400\LG400_E\2808633_Anleitung LG400E_Nov2014.docx
First-stage trigger
weight:
Turn screw “a” clock-
wise to increase the
first-stage trigger
weight; turn the screw
counterclockwise to
reduce it.
Second-stage trigger
weight:
Set the second-stage
trigger weight using
screw “d”. Turn the
screw clockwise to in-
crease the weight.
Turn the screw coun-
terclockwise to reduce it. If the second-stage weight is set too low, the trigger will not work.
First-stage travel:
Turn screw “b” clockwise to reduce the first-stage travel. Turn it counterclockwise to increase the
first-stage travel. For single-stage mode turn in screw “b” until the trigger is released. Then turn the
screw out just slightly.
Trigger stop:
Turn screw “c” clockwise to reduce the second-stage over-travel. Turn the screw counterclockwise to
increase it.
3. Handling / shooting / safety instructions:
Always hold the rifle in such a way that it cannot endanger anyone. Even an unloaded weapon must
be handled as if it were loaded. Familiarize yourself with handling the unloaded weapon until you
master every step perfectly. Read all of the instructions carefully before firing.
Before you can start shooting, you must switch on the electronic unit.
Pull the loading lever all the way back.
Make sure that there is no projectile in the barrel.
Pull back the finger rest until the LED begins to blink.
The air rifle is now ready for shooting.