Instruction manual

Instructions for Use
- 22 -
9. Chest rest for butt plate
To align the stock optimally with the body, offset-holed special steel discs can
be mounted on the butt plate rod. For setting, undo the set screw (a), align
the disc in its longitudinal direction and in its lateral displacement, and re-
tighten it using the set screw (a).
Tip: If the firearm has to be heavier in the butt stock area, with the centre of
gravity being shifted to the rear, several steel discs can be mounted on the
rod. It is also possible to position these discs between the butt plate and the
butt plate attachment.