Instruction manual

Instructions for Use
- 21 -
8. Fore-end for shooting from a rest
The Senior fore-end for bench rest shooting is fastened to the holding rail of
the stock with sliding blocks. To do so, undo the screws (a) and slide the
blocks together with the fore-end onto the rail. Then clamp the fore-end by
tightening the screws (a). The entire fore-end can be swivelled in the trans-
verse direction by undoing the screws (b).
• Maximum permissible width of bench rest surface
• Infinite lateral swivel in both directions
• Easy to fit and to remove