Instruction manual

LG300XT CARBONTEC OPERATING INSTRUCTIONS - SUPPLEMENT Stock length adjustment: To adjust the length of the stock, loosen the screws (1) and turn the knurled screw (2). Then retighten the clamping screws. Butt plate adjustment:
To adjust the inclination of the butt plate, loosen the screws (3). To move the plate all the way up, remove the screws (3) and move the plate attachment up. To move the butt plate in a lateral direction, loosen the screws (4). (Observe sports ordinance!) For additional ad- justment possi- bilities please see the enclosed MEC operating instructions.
-4-
LG300XT CARBONTEC OPERATING INSTRUCTIONS - SUPPLEMENT Chest rest: The rests are variably adjustable to fit against the chest. The contact with the weapon that one is accustomed to from a wood stock can be perfectly adjusted to one’s individual needs. Loosen the screw (1) to set the inclination and direction of each eccentric rest piece. In addition, the height and lateral position of the bar can be varied by loosening the screw in the bar (2).
-5-