Instruction manual

ManualsBrandsWalther ManualsAir RiflesAnatomic Stock

LG300XT CARBONTEC

OPERATING INSTRUCTIONS - SUPPLEMENT

Care of the carbon fiber stock:

Carbon is insensitive to all commonly used cleaning agents and weapon oils. It needs no

special care. Occasional wiping of the surface with a soft cloth is sufficient.

Technical data:

Caliber, mm 4.5 single-shot rifle

System pressure, bar 300 and 200

Working pressure, bar approx. 60

Firing capacity at least 600 shots per cylinder (at 300 bar)

at least 300 shots per cylinder (at 200 bar)

Weight, g approx. 3,960 with aluminum cylinder, without additional

weights

approx. 4,360 with steel cylinder, without additional weights

Dimensions L/H/W,

1,053 –1,115 / 260 / 50

Sight length, mm 650 – 830

Trigger weight 50 - 120

Accessories:

Service booklet, for free annual main-

tenance

Raised line of sight

Additional weights

High-quality hard protective case

-8-

LG300XT CARBONTEC

OPERATING INSTRUCTIONS - SUPPLEMENT

Be sure to read the enclosed standard operating instructions before using the rifle.

By purchasing this sporting weapon you have chosen a product of the highest quality: an en-

hanced member of the time-proven LG 300 air gun series made by WALTHER. The following

features deserve special mention:

• XT anti-vibration system

• Carbon as a carrier system ensures an extremely light and highly stable design

• The newly developed core made of special foam reduces vibrations considerably

• Optimized system bedding for tension-free rest in the stock

• Improved adjustment possibilities and reproducibility of these settings for cheek piece

and butt plate through rack mechanism and scale

• Individually adjustable center of gravity position by means of moveable shaft weights

• Fore-end adjustable in height and inclination

• Improved grip

• Removable on-board computer with easy-to-read LCD display

Summary of content (4 pages)

PAGE 1
650 – 830 50 - 120 -8- 4.5 single-shot rifle 300 and 200 approx. 60 at least 600 shots per cylinder (at 300 bar) at least 300 shots per cylinder (at 200 bar) approx. 3,960 with aluminum cylinder, without additional weights approx.
PAGE 2
Stock weights: Stock adjustment: -2- The stock can be adjusted in a large number of ways, making it possible to adapt this sporting weapon perfectly to one’s individual needs. OPERATING INSTRUCTIONS - SUPPLEMENT OPERATING INSTRUCTIONS – SUPPLEMENT -7- To insert additional weights into the fore-end, remove the compressed air cylinder. The weights can be easily adjusted from the outside. Fix them in position using the key supplied or a knurled screw.
PAGE 3
-5- The rests are variably adjustable to fit against the chest. The contact with the weapon that one is accustomed to from a wood stock can be perfectly adjusted to one’s individual needs. Loosen the screw (1) to set the inclination and direction of each eccentric rest piece. In addition, the height and lateral position of the bar can be varied by loosening the screw in the bar (2). To adjust the length of the stock, loosen the screws (1) and turn the knurled screw (2). Then retighten the clamping screws.
PAGE 4
Cheek piece adjustment The cheek piece can be easily adjusted without dismantling. To change the height, loosen the socket head cap screw (1) and set the cheek piece to the desired height using the knurled screw (2). Then fix this setting with the socket head cap screw (1). To adjust the inclination, loosen the socket head cap screw (3) and tighten it again after the required position has been found. Change the lateral position of the cheek piece by loosening the screws (4).