Instruction manual

21
Compressed air cylinder
The compressed air cylinder can
be replaced at any time, even
without being emptied by firing,
and then refilled. (Refill cylinders
from WALTHER, optional acces-
sory).
Caution!
The air to be used must
comply with DIN 3188 (brea-
thing air). The compressed air
cylinders must not under any
circumstances be subjected to
temperatures in excess of 50
degrees C.
Compressed air tanks that leak,
that are damaged or that are
more than ten years old must
be emptied without risk, and
may no longer be either used or
filled. Ten years after the date
of manufacture, the air tank
must be inspected / replaced
again by the manufacturer and
at the owner’s expense.
!
The date of manufacture is
stated on the tank.
Due to the optimization of the
air supply system, air can remain
in the regulator after the com-
pressed air cylinder has been
unscrewed. This remaining air
possibly escapes very slowly (be-
tween 5 and 10 seconds). In
order to guarantee safety, we
recommend to cock the wea-
pon and to pull the trigger after
having unscrewed the com-
pressed air cylinder. This allows
the remaining air to escape. If
necessary, this process can be
repeated one or two times. Al-
ways point the weapon towards
a direction where nobody is
endangered and convince your-
self that there is no pellet left in
the barrel.
Füllung benutzt oder gelagert
werden.
Achtung!
Die Demontage und Mon-
tage von Preßluftbehälter
und Druckminderer darf nur
von autorisierten Fachleuten
vorgenommen werden.
Adapter 300bar-Flasche
Filling adapter, 300 bar refill
cylinder
Adaptateur pour bouteille de
recharge 300 bar
Adaptador botella de 300 bar
Adapter 200bar-Flasche
Filling adapter, 200 bar refill
cylinder
Adaptateur pour bouteille de
recharge 200 bar
Adaptador botella de 200 bar