Operating Instructions

LG30 / LG30 Junior – Operating Instructions
-23-
6. Sights
Diopter mounting
Push the diopter on the prism guide and t
ighten hand-tight at the required eye
base with the knurled screw. Further tightening, for example with a tool, is not
necessary.
Height and lateral adjusting screw
Adjustments are made using the two adjusting knobs. The impact point is
adjusted by 0.5 mm at 10 m distance per click.
Adjustment ranges
Height adjustment 10 mm, lateral adjustment 8 mm.
Excessive turning when making adjustment
s will impair the accuracy. The
warranty will not be honored if the adjusting screw is excessively tightened.
Turning direction
Height adjustment = when firin
g high turn clockwise
= when firing low turn counterclockwise
Lateral adjustment = when firing to the right turn clockwise
= when firing to the left turn counterclockwise
7. Compressed air cylinde
r
The LG30 Air Gun is equipped with a screw-on/screw-off compressed air
cylinder, which is permitted for compressed air of max. 300 bar. It can be
screwed off, filled or exchanged at any time.
When refilling, use only oil- and water-free compressed air with a maximum
pressu
re of 300 bar. Filled compressed air cylinders should never be subjected to
temperatures over 50°C. The valve on the compressed air cylinder should not be
altered. The provisions of the TRG (technical regulations relating to pressurized
gas) for filling compressed air cylinders must be complied with.