Operating Instructions

LG30 / LG30 Junior – Operating Instructions

-28-

Unload the sports gun before changing the loading mechanism, as unintentional

activation of the trigger with opened loading lever can cause damage. As the

next step, the screw (a) and the cover (b) can then be removed. Then pivot out

the loading lever (c), the loading bar (d) and the coupling piece (e) together

(similar to the loading movement). After the screw (f) has been loosened

(approx. 3 rotations counterclockwise), the pivot pin (g) can pulled out of the

hole with the attached parts and re-inserted on the opposite side. It must be

ensured when inserting the coupling piece (e) that the lower of the two pins (h)

enters the hole of the loader coupling (i) and the loader pin (k) lies in the catch

stop of the loader coupling (i). Then fit the cover (b) on and tighten the screw

(b) from the free side. Finally, push the pivot pin in against the butt stock and fix

with the screw (f).

Stock cheek

Changing the side of the stock cheek (a) is performed in the same way as the

length positioning. As the stock cheek is symmetrically designed, it can be

turned by 180° after the screws (b) have been loosened, after which it is

screwed to the support (c) again.

d e