Instruction Manual

21
KK500 SMALL-BORE RIFLE
DE
EN
ES
FR
1. Undo the attachment screws on the
receiver and remove the receiver from
the stock.
2. Remove the bolt from the receiver.
3. Remove the trigger from the receiver
(take out both attachment pins).
4. Undo locking screw (a) on the guide
element and remove the element, making
sure you do not lose the cartridge lifter
and its spring.
5. Push out locking pin (b), rotate the ejector
by 180° and reattach it with the locking
pin.
6. Replace the guide element and attach it
with the countersunk screw.
7. Put the trigger back in and then insert the
receiver into the housing.
a
5.7 Conversion for left-handed use
5.7.1 Conversion of the bolt from right to left
Push the conversion aid / cleaning rod guide onto
the bolt and rotate the bolt lever to the left by two
notches. This converts the bolt for left-handed
use. The conversion aid / cleaning rod guide
can also be used to cock the bolt outside of the
housing.
5.7.2 Conversion of the ejector from right to left
If the weapon is always to be used by a left-hander, we recommend converting the cartridge ejector
for ejection to the left. This should be done by a qualified gunsmith.
b