Manualshelf

Instruction Manual

ManualsBrandsWalther ManualsFirearmsSystem
11121314151617181920
15
KK500 SMALL-BORE RIFLE
DE
EN
ES
FR
5.2 Adjusting the cheek piece
The cheek piece has a wide variety of possible adjustments. To adjust the cheek piece height, undo
the clamping screw (a), then alter the height of the cheek piece using the setting wheel (b).
Use the countersunk screws (c) to adjust the lateral displacement of the cheek piece. When they
are undone, the cheek piece can be pushed towards or away from the face.
To change the surface of the cheek piece from angular to rounded, undo the countersunk screws (d)
and turn the cheek piece around. Then retighten the countersunk screws (d).
To reposition the cheek piece forwards or rearwards in the longitudinal direction, remove the
countersunk screws (d) and move the sliding blocks in the required direction.
d
d
c a
c
b