Instruction Manual

KK500 SMALL-BORE RIFLE

5.1 Grip

The grip is fastened to a ball-and-socket joint allowing every possible movement about this center

point. In addition, the position of the grip can be moved in the longitudinal direction, sideways and

in its height. For longitudinal adjustment and lateral displacement, undo screw (a) and move the

grip to the required longitudinal and lateral position. Then fix this setting using the screw (a). The

height of the grip can be changed when the clamping screw (b) is undone. Ensure here that the

screw (c) is flush with the flat surface of the grip.

The three-dimensional inclination and rotation out of the middle plane of the grip is set using

the ball-and-socket joint fixed using the screw (c). To alter its setting, undo the screw (c), set the

required position of the grip and lock it in this position using the screw (c).