Operating Instructions

-37-
To reassemble the pistol, proceed in the reverse order. Do not ever use force.
Re-insert the breech block in the slide casing. Mount the barrel and tighten the
barrel holding screw (7). Then push in the cocking grip (47) and turn the ejector
back (8).
Push the trigger unit firmly into the frame and lock with the locking pin (3). The
point on the locking pin must then stand in line with the barrel. Now place the
slide casing on the frame at a spot about 7 mm forward of the “closed” posi-
tion, push fully backwards, then turn the slide locking lever (2) fully home to the
rear.
12. Shooting
Shooting with firearms is only permitted at licensed shooting ranges. Strict
compliance with the shooting range rules applying there is required. The instruc-
tions of the supervisory personnel must be followed!