Operating Instructions

-35-
Push the spring-loaded pin inward, at the same time pushing the cocking knob
(47) out (see arrow). On Model GSP .32, first remove one cocking knob by
loosening the Allen screw, then push the spring-loaded pin inward and tap the
tight-fitting cocking grip out sideways. When inserting the cocking grip, the liner
(a) must point to the rear.
Open the hinged ejector (8). Loosen the barrel locking screw (7) until the barrel
can be withdrawn, then pull the breech block out of the slide casing.
Removing the trigger unit
Turn screw (34) anti-clockwise, hold the trigger unit at the decocked hammer
and remove it upwards by turning it around the locking pin.