Operating Instructions

-34-
11. Stripping and assembling the pistol
Remove the magazine. Make sure that no live round is left in the chamber! Un-
cock the pistol. Push the locking spring on the slide locking lever (2) in and turn
the latter fully forward.
Push the upper part (barre1 with slide) forward by about 7 mm and lift off up-
ward. The slide lock lever must lie horizontally. Do not use force! Caution: Do
not put the upper part down on its top side.
Loosen the barre1 locking screw (7)with the Allen key until the locking pin for
the cocking piece (see arrow) coincides with the hole in the slide casing.