Operating Instructions

-29-
For example, if the first-stage weight is 600 g, then the second- stage weight
must be 400 g to make a total of 1000 grams.
Similarly if you prefer a first-stage weight of 300 g, then the second stage must
be 700 g to comply with the rules for 1000 g trigger weight.
7. Safety lever (US version only)
To disassemble the weapon, you must remove the frame. To remove the trigger
unit, first pull out the installation pin marked in red. Then remove the trigger as
described above.
When you assemble the weapon, make sure that the red installation pin fits cor-
rectly. The installation pin connects the safety lever on the frame with the lever
on the trigger assembly.
!!Important!!
A correct fit of the installation pin connecting the safety levers on the frame and
trigger assembly is essential to safe operation of the weapon.