Operating Instructions

-24-
4. Frame, frame settings
The correct position of the pistol in the hand is a prerequisite for successful
shouting.
The hand must hold the grip comfortably but firmly without clenching or cramp-
ing. Try the trigger to ascertain whether its position suits your finger and, if nec-
essary, adjust it lengthwise.
The handshelf can be made to suit the hand by resetting the part either up-
wards or downwards. Use the enclosed Allen key to adjust the screws.
5. Rear sight
Rear sight adjustment
Screw 5: If the shots group to the left, turn anti-clockwise; if
the shots group to the right, turn clockwise. 1 click = 5 mm
on the target.
Screw 6: If the shots group low, turn anti-clockwise; if the
shots group high, turn clockwise. 1 click = 7 mm on the
target.
To change the rear sight blade
Please do not use force!
To remove
(Demontage)
Push the blade out of the holder with the en-
closed special key.
To attach
(Montage)
Put the blade on the holder and push it down
in the direction of the arrow with the enclosed
special key.