Operating Instructions

FP500 FREE PISTOL

cal. .22l.r.

Weight of pull:

The weight of pull (factory set to approx. 30

grams) can be adjusted by means of the spring

screw (15), using an SW 2.5 Allen key.

2.8 Sear engagement – basic setting

The sear engagement is set in the factory and

only requires re-adjustment, when the hair

trigger (20) has been disassembled.

- Remove the grip plates

- Cock the hair trigger, use an SW 1.5 Allen

key to turn the adjuster screw (103) slowly

in a clockwise direction, until the hair trigger

releases.

- Use SW 1.5 Allen key to turn the adjuster

screw 1⁄2 a turn back, in an anti-clockwise

direction.

2.9 Sights

Adjusting the sights:

For elevation and windage (lateral) corrections,

one click corresponds to a 6 mm correction

over a distance of 50 m.

a.) Elevation corrections using the adjuster knob

Shot too low, turn in the direction of the arrow (anti-clockwise).

b.) Windage (lateral) correction using the adjuster knob

Shot to the left, turn in the direction of the arrow (anti-clockwise).

c.) Notch width correction using the adjuster screw

The notch width will decrease when turned in the direction of the arrow (anti-clockwise).

d.) Notch depth correction using the adjuster screw

The notch depth will decrease when turned in the direction of the arrow (anti-clockwise).

103