Instruction Manual

24 25
5.2 Lanyard Loop
An eyelet (5.2 Fig. 1) for attachment of a lanyard is
found at the lower end of the grip.
5.2 Fig. 1
5.3 Sights
The front and rear sight are replaceable. The point of impact is adjustable for windage and
elevation.
Windage
Windage adjustments are made by drifting the steel
rear sight from side to side. Field-strip the pistol as
described in section 4.1.
To adjust, move the rear sight in the direction you wish
the group to move on the target. For example: if the
group should move to the right, move the rear sight
to the right.
5.3 Fig. 1
CAUTION The standard WALTHER Steel Rear Sight (5.3 Fig. 1) will fit very tightly
into the slot cut in the slide.
Do not remove the sleeve below the steel rear sight.
5 ADJUSTING THE PISTOL TO ITS USER
5.1 Fig. 5
EN
DE
FR
ES
IT
TU