Instruction Manual

20 21

4.4 Lubrication

After cleaning the entire pistol, use a cloth to apply a light film of high quality gun lubricant

to all external metal surfaces and wipe clean.

Do not over-lubricate the pistol to the extent where lubricant will be dripping or running down

the handgun. Excess lubricant can attract dirt, unburned powder and carbon residue, which

can interfere with proper functioning of the pistol.

• Barrel:

Use a cloth to apply a light film of high quality gun lubricant to all external surfaces (A)

and the ramp (B) where the locking block cams the barrel.

• Frame:

A light coat of high quality gun lubricant should be applied to the mechanism.

Put only one drop of lubricant on the slide guides (C), and front end (D) and rear end (E)

of the trigger bar.

• Slide:

Put only one drop of lubricant on the safety plunger (F), the disconnector cut (G), and the

stripper rail (H).

• Magazine:

Apply a light film of high quality gun lubricant to all external metal surfaces.

4.4 Fig. 1

4 FIELD-STRIPPING, CLEANING, LUBRICATION, AND MAINTENANCE