Instruction Manual

18 19

1. Using a 4 mm punch, depress the floorplate catch

through the hole in the floorplate (4.2.1 Fig. 1).

2. Slide the floorplate forward off of the magazine tube

while continuing to depress the floorplate catch in

the tube.

3. Remove the floorplate catch and spring carefully

from the magazine tube through the bottom of the

tube.

4. Turn the tube right side up and remove the follower

through the bottom of the tube.

4.2.1 Fig. 1

4.2.2 Magazine Reassembly

1. Install the follower and magazine spring plus floor-

plate catch in reverse order back into the tube in

exactly the same orientation as they were in when they

were first removed during disassembly (4.2.2 Fig.

1, 2 and 3). Never use excessive force when assem-

bling the magazine.

2. While holding the floorplate catch in the tube, slide

the floorplate onto the tube so that the projection of

the floorplate catch engages the hole in the floor-

plate. There will be an audible “snap” heard.

4.2.2 Fig. 3

4.2.2 Fig. 1 4.2.2 Fig. 2

4 FIELD-STRIPPING, CLEANING, LUBRICATION, AND MAINTENANCE