Instruction Manual

16 17
The main components of the pistol are shown in
4.1.1 Fig. 4.
4.1.1 Fig. 4
4.1.2 Field-Stripping Reassembly
Hold the slide upside-down. Place the barrel inside
the slide with the locking lugs oriented as shown
in 4.1.2 Fig. 1.
Insert the recoil guide rod assembly:
Place the smaller end of the recoil rod into the spring
mounting at the front of the slide, and then insert the
large polymer end of the recoil spring into the lower
barrel recess, while taking up the spring pressure
(4.1.2 Fig. 1 and 2).
4.1.2 Fig. 1
4.1.2 Fig. 2
NOTE It is normal for the recoil guide rod assembly to flex when it is installed.
Holding the slide in one hand and the frame – with
the takedown lever rotated down – in the other hand,
push the slide from the front into the slide guides
of the frame (4.1.2 Fig. 3). Continue moving the
slide onto the frame, making sure that the slide also
engages the rear slide guides of the frame.
4.1.2 Fig. 3
4 FIELD-STRIPPING, CLEANING, LUBRICATION, AND MAINTENANCE
1.
2.
EN
DE
FR
ES
IT
TU