Instruction Manual

10 11

CREED

2.5.3 Slide Stop

Locking the slide in the “open” position:

Grasping the grip of the frame and with your finger off

the trigger and outside the trigger guard, depress the

magazine release, and completely remove the maga-

zine. Firmly grasp the serrated sides of the slide from

the rear with the thumb and fingers. While steadily

holding the grip, briskly pull the slide fully rearward

to extract any cartridge from the chamber and clear

it from the pistol.

To lock the slide in the open position, allow the slide

to move slightly forward from the rearmost position

while pressing upward on the slide stop (2.5.3 Fig. 1).

Releasing the slide from the slide stop:

Press down on the slide stop to release the slide and

allow it to move fully forward. For easier operation of

the slide stop, grasp the serrated sides of the slide

from the rear and pull the slide fully to the rear while

pressing down on the slide stop and then release the

slide from your grasp to allow it to move fully forward.

2.5.3 Fig. 1

2.5.4 Magazine

When the magazine is removed from the magazine

well in the grip, the number of rounds can be seen in

the witness hol (2.5.4 Fig. 1).

2.5.4 Fig. 1

2 PRODUCT DESCRIPTION