Instruction Manual

18
SETTINGS
fig. 15
fig. 17
fig. 14
10.2 Setting of the rear sight
The elevation is adjusted using the elevation knob below the rear
sight (fig. 14). Turning the knob adjusts elevation up or down.
Amount of adjustment is defined by a click when the knob is turned.
The windage is adjusted using the windage knob on the side of the
rear sight (fig. 15). Turning the knob adjusts for windage left or right.
Amount of adjustment is defined by a click when the knob is turned.
Note: Because this is a replica, the markings on the elevation and
windage knobs are not set for .22 LR ammunition.
10.3 Setting of the front sight post
The elevation is adjusted by pushing in the front sight post detent
near the front sight post (fig. 16) and simultaneously turning the front
sight post in desired position.The front sight post must be engaged
in one of the 4 detents (fig 17).
NOTE: Adjustment of the front sight post is for initial zeroing of the
rifle. For all future elevation adjustments use the rear sight.
fig. 16
10.4 Setting of the retractable stock (Models M4 Carbine; M4 OPS only)
On the Variants M4 Carbine and M4 OPS the buttstock can be adjusted in its length. Pushing the buttstock
latch allows the buttstock to be adjusted to various lengths (fig. 18).
fig. 18