Manual

8
EN
CLEANING THE BARREL, CARE
Cleaning rod, item no. 3.2050 (4.5 mm) and 3.2051 (5.5 mm)
Cleaning pellets, item no. 3.2055
ACCESSORIES AND PROBLEMS
Walther piston grease, 30 ml
3.2060
3-chamber silencer
2.4849
POSSIBLE CAUSES
Safety is engaged Dirt in barrel Wrong ammunition Ammunition not properly loaded Break the barrel again. The piston should audibly engage.
PROBLEMS
Poor shooting perfor-
mance
Gun does not shoot
Slow projectile
PROBLEMS
Walther spring grease, 10ml
3.2061
Make sure that your rifle is not cocked and not loaded.
Clean the barrel at regular intervals using materials intended for the purpose. Do not use wire
brushes as these can damage the inside of the barrel.
Rub down the exterior metal parts occasionally using a cloth moistened with gun oil and lightly oil
the break joint on the barrel at regular intervals.
Caution! Do not store your air rifle with the spring piston cocked. This is a dangerous state, and
could cause fatigue in the spring piston, impairing the rifle‘s performance.
When you use cleaning pellets (product no. 3.2055) we recommend putting a pointed pellet
behind a felt pellet moistened with gun oil and shooting both of them together at a safe pellet
trap. The point of the pellet presses the felt against the wall of the barrel, increasing the cleaning
effect and preventing dry firing.
1.
2.