User's Manual

900-0142
Rev 01
xTP Installation and User Guide
Page 15 of 16
Confidential and Proprietary
Figure 10.7 – Ethernet Indicator Lights
4. Orient the Trim Ring pin to the groove in the stanchion (12 o’clock).
Figure 10.8 – Orienting the Trim Ring
5. Push the xTPA in until you meet some resistance.
Figure 10.9 – Pushing the Subassembly
6. When you meet resistance, the xTPA has contacted the screw at the back of the
stanchion.
Figure 10.10 – Contacting the Screw