User's Manual

900-000096 Rev 03
(preliminary)
xBR V3 Installation and User Guide Page 14 of 14
Figure 6 – xBR Connections
DC Power Jack – This provides a means of powering the unit if PoE is not available.
Connect only a supplied or approved power supply.
Transmit Antenna SMA – This is a female SMA connection for the transmit antenna. The
transmit antenna must be installed at all times when the unit is powered up and
transmitting. Transmitting without the antenna installed may damage the unit.
This antenna must be of an approved or supplied type. Use of an unauthorized antenna is
not allowed.