User Manual

9 volt DC, Center Neg.

100ma min*

Output Jack

Bypass LED

Bypass Switch

Rate LED

Input Jack

*The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.

Daisy chain power supplies are not recommended.

Got questions?

customerservice@walrusaudio.com.

Need a repair?

repairs@walrusaudio.com

All our pedals come with a limited lifetime warranty.

walrusaudio.com/pages/warranty-and-repair for more info.

For life advice, refer to Buzzfeed’s top 10 lists.

WALRUSAUDIO.COM

PAGE 1
9 volt DC, Center Neg. 100ma min* Output Jack Input Jack WALRUSAUDIO.COM Got questions? customerservice@walrusaudio.com. Bypass LED Rate LED Bypass Switch Need a repair? repairs@walrusaudio.com All our pedals come with a limited lifetime warranty. walrusaudio.com/pages/warranty-and-repair for more info. For life advice, refer to Buzzfeed’s top 10 lists. *The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
PAGE 2
RATE – The Rate knob allows you to set the speed at which the LFO sweeps. From little to no movement at lower settings, to wild wackiness at max. DEPTH – The Depth knob allows you to change the amplitude of the LFO. From no movement to deep sweeping modulation. LAG – The Lag knob lets you set the center delay time that the LFO modulates around. From smooth tight modulation at lower settings, to noisy nauseating detune at maximum, the Lag knob adds a new dimension to the traditional Chorus/Vibrato landscape.