Specifications

33
CHIPPERS / SHREDDERS
Built-in Storage
Box
STANDARD FEATURES
999 CC Kohler Engine
Hydraulically driven
dual active rollers
If the BXTR’
s
rpm reaches
its minimum
setting,
Wallenstein’s
Rapid Recovery
technology takes over,
automatically reversing the
log away from the rotor. Rapid
Recovery eliminates friction
against the rotor, allowing the
rotor to increase rpm’s faster.
RAPID RECOVERY
AUTO REVERSE
Lift assist for servicing
using gas shocks.
Angling the
log against
the rotor
r
equires less
horsepower
to chip,
saving fuel.
ANGLED
ROTOR
The Safety Control Bar provides forward/
reverse control and two stop positions. Stop
the feed rollers when the bar is pushed in or
pulled out, providing another level of safety
that keeps the operator out of harm’s way.
SAFETY/CONTROL BAR
Fully programmable, IntelliFeed
monitors the rotor’s rpm, slowing the
rollers’ speed as needed. IntelliFeed
continues the chipping at a volume
that best matches its rpm.
7” X 11”
Opening
The extra wide
chipper opening
easily feeds
awkward branches
and logs with less
limbing befor
e chipping.
OPTIONAL (standard on BXTR6438P)
Electric brakes
eliminate extra
load on vehicle
(Part# C300)
Auto engage fluid
coupler is ideal for
contractors where
heavy duty work is
required (Part# C200)
BXTR 6438/6438P
• 999 CC Kohler Engine
• 7”H x 11”W Chipper Housing Opening
• 7” Diameter Capacity (Max 11” Slab)
• 25” x 34” Chipper Hopper Opening
• 30” Chipper Rotor with 4 Knives at 197 lbs.
• Electronic Feed Sensor, Hydraulic Feed Controller Unit
• Dimensions (LxWxH): 148.5” x 64” x 100”
• Weight 2225 lbs.
• Highway Tire Size ST205/75R14
• Built-in Tool Box
• Electric Brakes (BXTR 6438P)
• Auto Engage Centrifugal Clutch (BXTR 6438)
• Auto Engage Fluid Coupler (BXTR 6438P)
• Meets 2013 WorkSafeBC safety standards
BXTR
HYDRAULIC ROLLER FEED TRAILER
Wallenstein 2014 Product Catalog