Product Manual

31
Location Lubricate Hinges & Pivot Points
C
Hood Deflector
d
Discharge Chute Swivel
Every 100 hrs or annually, wash
and clean wood chipper, remove
entangled material, wood chips,
small debris.
On a regular basis check the condition of all hydraulic
lines, hoses and ttings. Replace any that are damaged.
Re-route those that are rubbing, pinched or crimped.
Tighten any tting that is leaking. Ensure ttings are clean
and free of dirt.
D
C
7.1.5 SERVICE ILLUSTRATION
Location Grease Points - 50 hrs or Annually
2
Rotor Main Shaft Rear Roller Flange
Grease with one shot of grease
2
8 Hours or daily, all models, grease
PTO Lubrication Points
(see Driveline Maintenance 7.2.1)
40 Hours or weekly
grease PTO
telescoping section