Product Manual

28
STORAGE SAFETY
• Store the unit in an area away from human
activity.
• Do not permit children to play on or around
the stored machine.
• Store the unit in a dry, level area. Support the
frame with planks if required.
6 STORAGE
After the season's use or when the machine will
not be used for a period of time, completely inspect
all major systems of the 3 Point Hitch Wood
Chipper. Replace or repair any worn or damaged
components to prevent any unnecessary down time
at the beginning of the next season.
Follow this procedure before storing:
1. Power Pack Accessory: review the engine
owners manual concerning storage and
prepare the engine for storage.
2. Remove all material from the machine.
3. Thoroughly wash the machine with a pressure
washer or water hose to remove all dirt, mud
or debris.
6.1 PLACING IN STORAGE
4. Inspect all rotating parts for entangled material.
Remove all entangled material.
5. Run the machine a few minutes to dry the
moisture from inside the machine.
6. Move the feed hopper up and lock.
7. Turn chute inward.
8. Touch up all paint nicks and scratches to prevent
rusting.
9. It is best to store the machine inside. If that is
not possible, cover with a waterproof tarpaulin
and tie down securely.
10. Store in an area away from human activity.
11. Do not allow children to play around the stored
unit.
When removing this machine from storage, follow
this procedure:
1. Remove the tarpaulin if covered.
2. Review and follow the pre-operation checklist.
(See Section 4.4).
6.2 REMOVING FROM STORAGE
Feed Hopper
Stored
Chute Turned
Inward
Z94242
Note: When lowering the
feed hopper, be aware of
a pinch point between the
hopper and the sub chute.