Product Manual

14
3 SAFETY SIGNS
1. Keep safety signs clean and legible at all times.
2. Replace safety signs that are missing or have become illegible.
3. Replaced parts that displayed a safety sign should also display the current sign.
4. Safety signs in Section 3 each have a part number displayed with it. Use this part number when ordering
replacements.
5. Safety signs are available from your authorized Distributor or Dealer Parts Department or the factory.
Z94120
Z94117
Z94118
Caution: keep hands and feet out of inlet
and discharge openings while machine
is operating to avoid serious personal
injury. Wait for all moving parts to come
to a complete stop before clearing
obstructions.
Caution: rotating driveline, entanglement
danger present. Keep hands, loose
clothing, and long hair away from
driveline while it is rotating.
Caution: ying objects. Be aware of and
stay clear of material discharge chute.
Machine can expel wood chips fast
enough to cause injury.
Do not point discharge at people, animals
or buildings.
Z94119
Caution: read and understand ALL
safety and operating instructions in
the manual. Read and understand ALL
safety labels located on the machine.
The most important safety device on this
equipment is an informed SAFE operator.
3.2 SAFETY SIGN EXPLANATIONS:
3.1 HOW TO INSTALL SAFETY SIGNS:
• Be sure that the installation area is clean and dry.
• Be sure temperature is above 50°F (10°C).
• Determine exact position before you remove the backing paper.
• Remove the smallest portion of the split backing paper.
• Align the sign over the specied area and carefully press the small portion with the exposed sticky
backing in place.
• Slowly peel back the remaining paper and carefully smooth the remaining portion of the sign in place.
• Small air pockets can be pierced with a pin and smoothed out using the piece of sign backing paper.
Caution: Pinch point hazard. When
lowering or raising the hopper into
position, be aware of pinch points and
keep clear of them to avoid injury.
Z94120
Z94117
Z94118
Caution: when performing any
maintenance on the chipper ensure you
stop and disengage the PTO. Potential
for serious injury or death if the PTO is
not stopped and disengaged.
Caution: Ensure the drive line is rotating
in the proper direction at the rated RPM.
Z94241
Z94241
Z94240
540 RPM
1000 RPM
Z94240
Z94242
Z94242