Install Manual

WALLENSTEIN by EMB Mfg.Z97562 BX52S 3PH AssyManual.120615

Rev # 230615Page 6 of 8

For threaded parts installation, refer to the torque charts in this manual.

Hopper Support LipHopper Support Lip

1024L1151024L115

Remove these nuts & bolts

9. Remove the remaining 4 nuts and bolts on the chute shipping bracket, remove and discard the

bracket, keep the hardware, (it is required to mount the chute to the chipper body) but the hardware

with the other chute nuts and bolts.

10. Removethe2xnutsandboltsthatarestoredontheangeofthechipperhopperopening,keepthe

hardware, it is needed to mount the hopper to the chipper body.

11. While a helper is holding the hopper assembly in place, carefully remove the two bolts that hold the

hopper to the shipping bracket (keep this hardware, it is needed to mound the hopper to the chipper

body).

12. With the aid of the helper,

• move the hopper to the chipper hopper opening and place the hopper assembly on the hopper

support lip.

• insertandfastenthe2xnutsandboltsonthetopange.

• insertandfastenthe3xnutsandboltsonthebottomange.

)