Install Manual
WALLENSTEIN by EMB Mfg.Z97562 BX52S 3PH AssyManual.120615
Rev # 230615Page 4 of 8
For threaded parts installation, refer to the torque charts in this manual.
This assembly manual is for the BX52S Chipper.
Themachineisshippedfromthefactoryinapartiallydisassembledcongurationand
attached to a pallet that provides easy moving and handling. Always use tools, equipment
and fork lifts of appropriate size and capacity for the job.
Inspect for damage from shipping, immediately contact
the shipping company if damage is found.
When the machine is shipped, follow this assembly procedure:
1. Clear the area of bystanders, especially small children.
2. Be sure you have all the required tools before you start.
3. Move the shipping package into an area where it is accessible from all sides.
4. Remove the screws holding the lid to the shipping pallet, remove the lid and set aside
away from the assembly area.
5. Remove all screws that secure the main chipper body to the skid
Caution: Heavy or bulky
parts: prevent potential
injury ask for help when lifting or
moving heavy, bulky parts.
5.0 ASSEMBLY