Specifications

Press DN, there will interface of Curve Point, choose L M H by press R/L. press DN, there will be Output
Setting. Press R/L to choose the value of point, and press ENT to confirm and then press EXT to exit.
point
L M H
Flight mode
output
Normal Flight -15% +25% +55%
Stunt -55% +0% +55%
5.1.10 Gyro Sensor
Press UP/DN to choose Gyro Sensor in Functional Menu, then press ENT into Gyro Sensor interface, press R
or L to choose Manual Setting; press DN, SWITCH will be shown, press R or L to choose HOLD SW; press
DN, "Pos 0" will be show first, and press R/L to increase/decrase value individually. Press DN "Pos 1" will be
show after finishing "Pos 0". and press ENT to confirm and then press EXT to exit.
Mode Manual
Switch HOLD SW
Pos 0 75.0%
Pos 1 50.0%
5.2 DEVO-6/7/8S/10/12S(optional radio) settings
5.2.1 Type:Helicopter
5.2.2 Swash type:1 Servo Normal
5.2.3 Device Output
DEVO-6 DEVO-7 DEVO-8S
Gear GEAR SW Gyro GEAR GEAR ACT
Gear GEAR SW Active
Pitch System Active AUX2 AUX2 GYRO
Pitch System Active
AUX2 FMOD SW Gyro
AUX3 RUDD D/R Active
DEVO-10 DEVO-12S
Gear GEAR SW Active Gear GEAR SW Active
AUX2 FMOD SW Gyro
Pitch System Active
AUX2 AUX2 Lever Gyro
AUX3 RUDD D/R Active
AUX3 AUX3 Lever Active
AUX4 AUX4 KB Active
AUX4 AUX4 Lever Active
AUX5 AUX5 KB Active
AUX5 AUX5 Lever Active
AUX6 AUX6 Knob Active
AUX7 AUX7 Knob Active
6
05
Transmitter
setup